Cable Optimiser Pro

Home \ optimising-audio-ecosystem-installation-guide \ cable-optimiser-pro

CABLE OPTIMISER PRO CO-P1 AND CO-P2

INSTALLATION GUIDE

CO-P1:

Type I is suitable for audio cable sizes between 7mm – 13mm

Type II is suitable for audio cable sizes between 14mm – 20mm

CO-P2:

Type I is suitable for audio cable sizes between 16mm – 22mm

Type II is suitable for audio cable sizes between 23mm – 29mm

Follow the instructions on the back of the Cable Optimiser Pro in order to easily install it to your audio cable, using the supplied screws and screwdriver to assemble the upper and lower parts correctly.

To achieve the best possible results, first fix the optimiser to the cable loosely with the provided screws while you locate the most desirable position on the cable. It is always best to leave the Cable Optimiser Pro hanging in the air, with nothing touching it.

Each Cable Optimiser Pro comes with a piece of specially treated sponge inside. A Performance Curve is also provided where you will need to adjust the angle of the four screws on the optimiser depending on the size of your cable. How much the optimiser improves your sound quality very much varies, depending on the type and size of the cable, and the manufacturing materials used. Adjust the screws according to the Performance Curve provided until you find the optimal pressure that works best for your cable.

The recommended adjustment angle varies slightly depending on the installation position along the cable. Generally, we recommend adjusting the angle within around 30 degrees to achieve the best sound performance, but we suggest finely tuning each screw at this angle while playing music to achieve the best possible result.

The Cable Optimiser Pro is designed to optimise the manufacturing materials used in the cable body. We advise preventing the optimiser body from touching any other materials, such as the floor, your audio equipment or any other cables, as this may affect the optimisation quality. For best results, try to ensure the optimiser hangs isolated in the air without touching anything around it.

For determining the best material optimising performance in the listening tests, please refer here.